— NEPTUNE BOAT LIFTS SERIES

NEPTUNE ELEVATOR BOAT LIFT

G6 SuperFast · SEArmor™ · 316 SS Hardware

The most advanced vertical boat lift system Neptune builds. Aluminum I-beam tracks driven to refusal carry the cradle straight up your seawall and dock pilings, powered by the G6 SuperFast drive and backed by our Installed For Life™ guarantee on every install.

The ElevatorAssembly

Rotate. Explore. Inspect.

— CLIENT TESTIMONIALS

What the
Water Tells Us.

— FEATURED POWER SYSTEM

SIX TIMES FASTER.

The G6 SuperFast motor is Neptune’s highest-performance drive system delivering 6× the lift speed of standard Neptune motors. Your boat is out of the water in under 60 seconds. Built-in self-limiting switch means you never over-travel the lift position. Keep your lift running year after year with preventative drive inspections and periodic maintenance.

6X

Speed vs Standard

>60S

Full Lift Cycle

AUTO

Limit Switch

— MATERIALS

BUILT FOR SALT.

SEArmor™ is Neptune’s proprietary marine coating applied to all structural aluminum components. Engineered specifically for South Florida’s salt environment, it outperforms standard anodizing and powder coat by preventing oxidation at the substrate level, not just the surface.

6061-T6

Aluminum Grade

316SS

Hardware Grade

∞

Salt Rating

— CAPACITY

ANY VESSEL ANY SIZE.

An elevator boat lift isn’t one-size-fits-all. We take your boat’s loaded weight, beam, hull and seawall conditions and spec the lift before a track goes in. Standard elevator lifts carry 5,000 to 20,000+ lbs for 20 to 40 ft boats. Elevator Yacht Lifts carry 20,000 to 72,000+ lbs.

72KLBS

Max Rated Capacity

4-POINT

Vertical Lift

CUSTOM

Sized Per Vessel

— FOLLOW ALONG @ALLPOWERMARINE

See Our Work
In The Water.

— NEPTUNE ELEVATOR BOAT LIFTS

TECHNICAL SPECS.

CAPACITY & SIZE

Max Lift Capacity

72,000 lbs

Standard Capacity Range

3K - 72K lbs

Piling Configuration

4-Post Vertical

Beam Accommodation

Up to 14ft

Custom Sizing

Available

MOTOR & DRIVE

Motor Type

Direct Drive, G3, G6 SuperFast

Speed vs. Standard

6x Faster

Full Lift Cycle

<60 Seconds

Limit Switch

Self-Adjusting Auto

Remote Control

Wireless Included

MATERIALS & COATING

Post Material

6061-T6 Aluminum

Post Coating

SEArmor

Hardware Grade

316 Stainless Steel

Cable Material

316 SS Wire Rope

Warranty

Installed For Life

— THE ALL POWER PROMISE

Installed
For Life

With every boat lift we sell backed by the Installed For Life commitment, you don’t just get a premium lift — you get a team that stands behind the install for the life of your lift.

EVERY LIFT WE INSTALL IS COVERED BY THE ALL POWER PROMISE

No asterisks. No expiration. Just a handshake that lasts a lifetime.

All Power Marine is a proud 4ocean Certified Partner. With every boat lift we sell, 100 lbs of trash and plastic is pulled from the ocean — because the water we work on every day is worth protecting.

100lbs

Of Ocean Trash Removed With Every Lift Sold

— Mobile Service Fleet

We Service What We Sell.

We sell Neptune lifts, we install them, and we are the ones who come back when something goes wrong. Our trucks run Palm Beach and Broward stocked with cables, motors, control boxes and switches, so the diagnosis and the repair happen on the same visit.

Certified

Neptune factory trained

Stocked

Trucks carry the parts

No Subs

Our crew, our trucks

Authorized Neptune Dealer

Factory-Certified Technicians

Stocked Service Trucks

Lifetime Warranty On Installs

— What We Fix

Common Failures. Fixed Dockside.

Cable Replacement

Fraying, flattening, kinks, broken strands. We replace cables. We don’t nurse them along.

Motor Replacement

Slow travel, intermittent operation, a motor that hums and won’t turn. Swapped on site.

New Control Box

Moisture in the box, corroded contactors, a breaker that keeps tripping. Rebuilt or replaced.

Limit Switches

Lifts that overrun the top, stop short, or won’t auto stop where they should.

Pulley Replacement

Seized sheaves and worn bearings chew through cable. New pulleys, repacked and aligned.

Electrolysis on I-Beams

Stray current and spent anodes eat aluminum from the inside. We trace the source.

Fix it once. Then stop it from happening again.

MAINTENANCE

Keep Your
Lift Running.

Annual

1X Per Year

  • Full lift inspection
  • Cable & bunker check
  • Motor service & lubrication
  • Hardware tighten & adjust

Semi-Annual

2X Per Year

  • Everything in Annual ×2
  • Priority scheduling
  • Pre-hurricane & post-season checks
  • Extended parts warranty

Custom

Tailored Schedule

  • Commercial marinas
  • Multi-lift properties
  • Quarterly or monthly options
  • Dedicated account manager

— COMMON ELEVATOR BOAT LIFT QUESTIONS

ANSWERS BEFORE YOU ASK.

An elevator boat lift mounts to a seawall or tied-back piling structure. Aluminum tracks are driven into the seabed, and lifting arms carry the cradle up and down them. It lifts from one side, so the slip stays open and fewer pilings surround the boat.

It depends on the waterfront. Seawall lots, canal homes and tight slips usually suit an elevator lift. Open slips with four solid pilings usually suit a 4-post lift. We recommend the right one after the site visit.

Standard elevator lifts from Neptune Boat Lifts are built from 5,000 to 20,000+ lbs, in sizes including 10,000, 15,000 and 20,000 lb. Elevator Yacht Lifts carry 20,000 to 72,000+ lbs. Size to the boat’s loaded weight, not its dry weight.

Elevator boat lift prices depend on capacity, drive (Direct Drive, G3 or G6), track length, seawall work and permits. We quote after a site visit so the price matches your boat and your wall. Call or text Kyle at 954-632-1051.

That is the first thing we check. The lift loads the seawall or tie-back structure, so we inspect its condition, cap and tie-backs on the site visit. If the wall is not ready, we tell you before you buy.

With the G6 SuperFast drive from Neptune Boat Lifts, 6x faster than the rest. On the manufacturer’s speed chart for a 10,000 lb 4-post lift, the G6 travels 86 inches a minute against 12.5 for a typical flat-plate lift. Elevator speed varies with capacity and track length.

Yes, when they are built and maintained for it. Neptune Boat Lifts uses aluminum and stainless steel, solid Delrin rollers and sacrificial anodes, with an optional SEArmor™ package. Because the tracks sit in the water, anodes and electrolysis protection need regular checks, and we trace any stray current at the source.

All Power Marine is South Florida’s #1 Neptune Boat Lifts dealer, serving Fort Lauderdale, Broward and Palm Beach County. Every elevator boat lift we sell is permitted and installed by our own crew.