— Custom Platform & PWC Lifts
CUSTOM PLATFORM LIFTS
The All Power Marine drive-on platform is the simplest, most reliable way to get a boat or personal watercraft out of the water. Single-ski Swinger lifts, multi-ski lifts and deck-level platform lifts for boats, skis, tenders and toys.
Drive-On Platform Lift • In Operation
The Platform.
Your craft sits on custom bunks on the raised platform, tied down to deck cleats and fully out of the water. No growth, no fouling, no salt soaking into the hull.
One button on the wireless remote starts the motor. Stainless cables lower the platform until the deck sits just below the waterline.
With the deck under the waterline, you’re ready to go. Start up and back off the platform under your own power. No ramps, no wading, no pushing off.
Press the remote again and the empty platform lifts up to the top height set by the limit switch. When you come back, lower the platform, idle on with the keel guide lining you up, and lift.
— CLIENT TESTIMONIALS
What the
Water Tells Us.
— The Platform
DRIVE ON. WALK AROUND.
The All Power Marine platform operates on
Drive your boat or ride your jet ski onto the ramp at idle, and the platform rises with the weight, lifting the hull clear of the water automatically. Delrin rollers on the entry ramp protect your hull on the way in and out.
ZERO
Mechanical Parts
AUTO
Float-Rise on Load
IFL
Installed For Life
— Universal Fit
AnyLIft.
Turn your boat lift into a platform lift and give everything that floats a dry, level place to live: tenders, jet skis, kayaks, paddleboards, or all of them at once. Every All Power Marine platform lift is custom engineered to your fleet including deck-level Stealth lifts that hide the lift structure in the platform frame. If you’re adding to an existing lift, no permit required.
50,000lbs
Per Platform Rated
Universal
Fit
Stealth
Deck level
— OUR WORK
LIFTS WE'VE PUT IN THE WATER.
Nothing in this category yet.
— FOLLOW ALONG @ALLPOWERMARINE
See Our Work
In The Water.
— PLATFORM Boat LIFTS
TECHNICAL SPECS.
CAPACITY & SIZE
Rated Capacity
50,000 lbs
Platform Configurations
Universal
Maximum Beam
Universal
Hull Fit
Universal
Expandable
Add units anytime
OPERATION
Lift Type
Drive-on
Moving Parts
Boat Lift
Motor
Direct Drive, G3, G6 SuperFast
Cables
Existing
Hull Protection
Custom bunking
MATERIALS & COATING
Mount
Piling or concrete mounted
Hardware Grade
316 Stainless Steel
Keel Guide
Adjustable
Maintenance
None required
Warranty
Installed For Life
— THE ALL POWER PROMISE
Installed
For Life
With every boat lift we sell backed by the Installed For Life commitment, you don’t just get a premium lift — you get a team that stands behind the install for the life of your lift.
EVERY LIFT WE INSTALL IS COVERED BY THE ALL POWER PROMISE
No asterisks. No expiration. Just a handshake that lasts a lifetime.
All Power Marine is a proud 4ocean Certified Partner. With every boat lift we sell, 100 lbs of trash and plastic is pulled from the ocean — because the water we work on every day is worth protecting.
— Mobile Service Fleet
We Service What We Sell.
We sell Neptune lifts, we install them, and we are the ones who come back when something goes wrong. Our trucks run Palm Beach and Broward stocked with cables, motors, control boxes and switches, so the diagnosis and the repair happen on the same visit.
Certified
Neptune factory trained
Stocked
Trucks carry the parts
No Subs
Our crew, our trucks
Authorized Neptune Dealer
Factory-Certified Technicians
Stocked Service Trucks
Lifetime Warranty On Installs
— What We Fix
Common Failures. Fixed Dockside.
Cable Replacement
Fraying, flattening, kinks, broken strands. We replace cables. We don’t nurse them along.
Motor Replacement
Slow travel, intermittent operation, a motor that hums and won’t turn. Swapped on site.
New Control Box
Moisture in the box, corroded contactors, a breaker that keeps tripping. Rebuilt or replaced.
Limit Switches
Lifts that overrun the top, stop short, or won’t auto stop where they should.
Pulley Replacement
Seized sheaves and worn bearings chew through cable. New pulleys, repacked and aligned.
Electrolysis on I-Beams
Stray current and spent anodes eat aluminum from the inside. We trace the source.
Fix it once. Then stop it from happening again.
MAINTENANCE
Keep Your
Lift Running.
Annual
1X Per Year
- Full lift inspection
- Cable & bunker check
- Motor service & lubrication
- Hardware tighten & adjust
Semi-Annual
2X Per Year
- Everything in Annual ×2
- Priority scheduling
- Pre-hurricane & post-season checks
- Extended parts warranty
Custom
Tailored Schedule
- Commercial marinas
- Multi-lift properties
- Quarterly or monthly options
- Dedicated account manager
— COMMON JETE SKI & PLATFORM LIFT QUESTIONS
ANSWERS BEFORE YOU ASK.
What is a platform boat lift?
A platform lift raises a full platform frame instead of bunks alone, so a boat, a tender or several jet skis sit on a flat, level deck above the water. Every Neptune Boat Lifts platform lift is custom engineered to the vessel, the platform size, the piling layout and the dock. We design, permit and install them.
What can a platform lift carry?
Boats, tenders, multiple jet skis or a mix of all three, sized to their combined loaded weight. Neptune Boat Lifts platform examples run from 10,000 lb on a 16′ x 20′ platform to 60,000 lb on a 17′ x 50′ platform, and every system is engineered to the project.
What is a Stealth platform lift?
The deck-level platform lift from Neptune Boat Lifts. Its sealed Direct Drive gearboxes, stainless motors and SEArmor winders are encased in the top rail frame, so no top beams stand above the deck and the lift sits flush with the dock. Standard platform lifts mount their top beams above deck level and suit projects where structure, access or budget favor them.
Can I add a platform lift to my existing dock?
Often. A platform lift is designed around the dock’s piling layout, structure, decking and access, including catwalks and sternwalks. We inspect the site first and tell you whether the dock can carry it as built or needs new pilings.
What is the best lift for jet skis?
It depends on how many you own and how you dock. A single ski on a seawall suits the Swinger from Neptune Boat Lifts. Two or more skis, or skis plus a tender, suit a platform lift or a multi-ski setup on an elevator, 4-piling or beamless lift. We recommend the setup on a site visit.
How much does a custom platform lift cost?
Platform lift prices depend on platform size, capacity, pilings, decking, drive, electrical and permits. A two-ski platform and a 60,000 lb boat platform are different projects, so we price after a site visit. Call or text Kyle at 954-632-1051.
Why lift a boat or jet ski out of the water?
Anything left in the water collects growth, staining and salt, and it rubs the dock in every wake. A platform lift stores it dry above the water, ready to use, with a level surface for boarding and cleaning.
Do platform lifts need a permit?
Usually, especially when new pilings go in. Requirements vary by city and county. We handle the permit for every lift we install.